Skip to content
Schedule a free demoSchedule a demoDemo

Best Store Visit and Audit Apps for District Managers (2026)

Eight store visit and audit apps for district managers compared on scored audits, follow-ups, offline use and published prices, from the vendors' own pages.

Will Jocson · Founder, MaintainIQ Updated 11 min read
Summarize with AI

Key takeaways

  • A store visit app has one job that paper cannot do, turn a failed item into a task with a name on it and keep it open until it is closed.
  • Three of the eight tools publish a price, MaintainIQ, GoAudits and Mitti. Xenia, YOOBIC, Crunchtime Ops Execution, Operandio and Jolt ask you to request one.
  • If store visits are the only thing you need, a per-user audit tool is the cheapest route, because only the people doing the audits pay.
  • If the same stores also need daily checklists and temperature logs for the whole crew, a per-location price with unlimited users usually works out better.
On this page

We build MaintainIQ, which is one of the eight tools on this page. Weigh what follows accordingly. To keep it honest, every competitor fact and price comes from that vendor’s own website, checked on 21 November 2026, and where a vendor’s pages do not say something we write “not stated.” We also show the sums that make MaintainIQ look expensive, because for some buyers it is.

This page is for district managers, area managers and owners who walk their restaurants or convenience stores with a list, score what they find, take photos and need the problems fixed before the next visit.

How we chose

We looked for six things. They are the difference between a visit that produces a report and a visit that produces a change.

  1. Scored audits, by section. Exterior, front of house, kitchen and restrooms each get a score, and the visit gets a total, so a 90 at one store means the same as a 90 at the next.
  2. Photos on failed items. A picture of the problem, attached to the item that failed.
  3. Follow-up tasks with an owner. A failed item becomes a task that someone owns, whatever name the vendor gives it.
  4. Comparing locations. One view of every store’s last score, so you know where to drive next.
  5. Works on a phone, with or without signal. Walk-ins, basements and fuel islands are where the connection drops.
  6. A published price. If a vendor will not show one, we say so.

Two limits. We did not run a hands-on test of all eight tools. This is a comparison of what each vendor publishes about itself, read on the date above. And the order below is not a ranking. Tools with a published price come first.

The tools at a glance

Tool Scored audits When an item fails Works offline Price
MaintainIQ Yes, in sections, as a percentage and a letter grade Follow-up task, tracked with the same statuses as a work order. You choose per audit whether follow-ups are optional or required Yes, syncs later Per location. $67 per month billed annually ($799 a year), or $79 month to month. Unlimited users. One-time setup fee
GoAudits Yes, scored brand audits, filterable by store, region, auditor or check type Action with a deadline and a priority. Alert to the area manager if it runs late Yes Per user. Starter $10 to $12 per user per month, Enterprise $30 to $35
Mitti (by SafetyCulture) Yes, scoring can be turned on for a template Follow-up tasks assigned to people from a response Yes, syncs later Per seat. Free for up to 10 seats. Premium $24 per seat per month billed annually, or $29 monthly
Xenia Yes, weighted, with pass and fail thresholds Follow-up task created automatically, with escalation if it is overdue Not stated on the page we checked Not published. Per user or per location
YOOBIC Yes, the visit is scored automatically Action with a named owner and a deadline. A photo confirms the fix Not stated Not published. Priced by store count and modules
Crunchtime Ops Execution (formerly Zenput) Audits are listed. Scoring not described on the page Not described on the page Not stated Not published
Operandio Yes, with scores benchmarked across sites Follow-up action with an owner, due date and escalation rules Yes, syncs later Not published. Paid pilot, no free trial
Jolt (now SmartSense by Digi) Not described on the pages we checked Not described Not stated Not published

What it costs, worked through

Take one district manager covering 12 stores. Here are three ways to buy, using published prices.

What you need MaintainIQ, annual plan GoAudits, Starter Mitti, Premium
Store visits only. One district manager logs in 12 stores × $67 = $804 a month 1 user × $10 = $10 a month 1 seat × $24 = $24 a month
Store visits, and each store manager logs in too. 13 people $804 a month 13 users × $10 = $130 a month 13 seats × $24 = $312 a month
Store visits plus daily checklists for the whole crew. Say 15 people a store, 180 people $804 a month 180 users × $10 = $1,800 a month 180 seats × $24 = $4,320 a month

Read that table from the top down. For visits alone, MaintainIQ is the expensive choice by a wide margin, and we would not tell you otherwise. It only becomes the cheaper one when the same app is also running opening and closing checklists and temperature logs for everyone on every shift. GoAudits also says store managers who only receive actions can be assigned them with no per-user fee, which narrows the gap in the middle row, and its Starter plan has limits, covered below. Decide which row describes you before you compare anything else.

The tools with a published price

MaintainIQ

MaintainIQ is our product. Its internal audits and inspections run the same way: you write the audit in sections that follow the way you walk a location, and the area or district manager answers each question on a phone, adding photos as proof.

Against the six criteria. Each audit is scored as a percentage and a letter grade, and saved with who did it and when. A failed item can create a follow-up task, tracked with the same statuses as a work order, and on each audit you choose whether those follow-ups are optional or required. Each location shows its last auditor, date and score, with a filter for a group of locations such as a region or brand, one-click PDF reports and an export of all audit scores to Excel. It works with no signal and syncs later. Each person can use it in English or Spanish. And the price is on our pricing page: from $67 per location per month, billed annually ($799 a year), or $79 month to month, with unlimited users, so every district manager and store manager gets a login. A one-time setup fee applies.

Where we lose, plainly. As the table above shows, if you only want store visits, per-user tools cost far less. To look at one location’s scores over time, you export to Excel. There is no self-serve free trial, only a demo and a 90-day money-back guarantee on annual plans. We have no published security certification, and our footprint on third-party review sites is thin. MaintainIQ is for operations audits, not financial ones.

Best for: operators of restaurants and convenience stores who want store visits, daily checklists, temperature logs and repairs in one app, with a follow-up from a visit landing in the same place the store already works. Skip it if audits are all you need.

GoAudits

GoAudits is built for exactly this job. Its convenience store page describes scored brand audits on a phone or tablet, online or offline, with photo evidence of every finding, annotated and timestamped, and a scored report generated the moment the audit closes. A failed item is assigned to the store as an action with a deadline and a priority, and if the deadline passes the area manager gets an automatic alert. Results can be filtered by store, region, auditor or check type. Its store visit report guide adds timestamps and GPS on each submission, and its restaurant page adds photo proof of the fix.

Its pricing page lists Starter at $10 to $12 per user per month and Enterprise at $30 to $35, depending on billing, with a 14-day free trial and a 60-day money-back guarantee. Read the Starter limits: 10 checklist templates and 25 locations, with scheduling and assigning audits listed under Enterprise.

Best for: district and area managers who want a dedicated audit tool at a low published price. Skip it if you want the store crew working daily checklists in the same app on their own logins.

Mitti (by SafetyCulture)

Mitti is the inspection app many operators still call SafetyCulture or iAuditor. Its inspections page describes photo evidence with annotations, follow-up tasks assigned to the right people from a response, inspections turned into reports instantly, and live views of team and branch performance. Inspections save automatically and sync when you are back online. Its help center explains how to turn on scoring for a template.

The pricing page lists a Free plan for up to 10 seats with 5 active templates, and Premium at $24 per seat per month billed annually, or $29 monthly. For businesses with many sites it also offers one price per site with unlimited users, by quote.

Best for: audit programs of any size, with a large library of public templates to start from. A single district manager can begin on the free plan. Skip it if everyone in every store needs a seat and you want that cost published.

The tools that do not publish a price

Xenia

Xenia’s own buyer’s guide to inspection software, last updated 28 June 2026, describes weighted scoring, where a critical item can count for ten points and a minor one for one, with pass and fail thresholds that start a follow-up automatically. A failed audit item becomes a task tracked to resolution, a photo of the fix is required before it closes, and an overdue task escalates to the district manager. Operations teams can see overdue items by location, region and district manager, and benchmark locations against each other.

That is the most complete feature list on this page for a district manager, and the weighted scoring is something we do not claim. The trade-off is price. Xenia’s pricing page shows no dollar figure, only that it offers per-user and per-site pricing. Its FAQ ties a 14-day free trial with no credit card to the entry plan; the higher plans start with a demo.

Best for: larger groups that want weighted scoring and escalation rules and are comfortable buying on a quote. Skip it if you want to know the price before the call.

YOOBIC

YOOBIC comes from retail. Its own guide to store audit software, last updated 10 November 2026, says visits run as mobile checklists, any flagged item requires a photo, and the platform scores the visit automatically and builds the report. A failed check creates an action with a named owner and a deadline, and the store team confirms the fix with a photo. District, regional and headquarters teams see the results on live dashboards. Its convenience store page adds forecourt checks, fuel and UST checks, and bite-sized mobile learning.

The pricing page shows no figures. It says YOOBIC is priced by store, not by seat, depending on store count, the capabilities you choose and the rollout, and its menu offers a four-week proof of value that is priced up front, without showing the amount.

Best for: retail and convenience chains that want store visits, tasks, communications and training from one vendor. Skip it if you run a handful of restaurants and want to start this month at a known price.

Crunchtime Ops Execution (formerly Zenput)

Zenput is now Crunchtime Ops Execution. Its product page says it handles daily work from line checks and opening checklists to audits and food safety, that teams above the store can see what work is being done without visiting, and that it connects to Bluetooth temperature probes. It says customers use it in more than 100,000 locations and names brands such as Domino’s, Chipotle and Five Guys. The page does not describe how audits are scored or what happens when an item fails, so ask to see both. No price or free trial is shown.

Best for: large chains, especially ones that already use Crunchtime for inventory or labor. Skip it if you run a small group and want a published price.

Operandio

Operandio’s inspections page describes recurring or ad hoc audits with templates applied across locations, with photos, notes and timestamps on each answer. A failed inspection can generate a follow-up action with an owner, a due date and escalation rules. Audit scores, trends and recurring issues can be benchmarked across every site, brand or region, and inspections can be completed offline and synced later. Its pricing page says pricing depends on locations or users and the modules you choose, with a paid pilot in place of a free trial.

Best for: franchise and multi-brand groups that want audits as one module of a wider platform, proven in a pilot first. Skip it if you want a published price or a quick start.

Jolt (now SmartSense by Digi)

Jolt is on most lists of restaurant apps, so it is here, but the fit for this job is weak. Jolt’s old pricing address now forwards to a SmartSense quote form, and the SmartSense restaurant page describes daily checklists, food labels and wireless sensors. It does not describe scored audits or store visits for a district manager.

Best for: stores that want daily checklists, labels and sensors. Skip it if scored store visits are what you are shopping for.

How to pick

  • Count who logs in. One district manager, or every store manager, or the whole crew? The cost table above turns on that answer.
  • Decide what else the app must do. Visits only points to GoAudits or Mitti. Visits plus daily checklists and temperature logs points to MaintainIQ. Visits plus training and communications across a retail chain points to YOOBIC. Weighted scoring and escalation at scale points to Xenia.
  • Fail one item in the demo. Watch who is told, what task opens, what the store has to do to close it and whether you can see it is still open a week later.
  • Ask to see two stores side by side. That is the screen you will use most.
  • Try it where the signal is worst. The walk-in, the stock room and the far fuel island.
  • Get the all-in price in writing. Plan, modules, setup and contract term.

Whatever tool you choose, the list matters more than the software. Start from a walkthrough you already trust, such as our free district manager store visit checklist, a scored scorecard with an actions table, or the broader facility walkthrough checklist.

If you want visits, daily checklists and repairs in one place with every location on one dashboard, MaintainIQ is built for that at two locations or two hundred. Book a demo and bring your own store visit form. For the daily side, see our comparison of the best digital checklist apps for restaurants.

Frequently asked questions

What app do district managers use for store visits and walkthrough audits with scores and photos?

Several. GoAudits, Mitti, Xenia, YOOBIC, Operandio and MaintainIQ all describe scored audits with photos and follow-up tasks. GoAudits and Mitti are dedicated audit tools priced per user. MaintainIQ scores each audit as a percentage and a letter grade and is priced per location with unlimited users. Xenia adds weighted scoring but does not publish its price.

What is a good inspection app for internal audits at restaurants and convenience stores?

For audits alone, GoAudits has a page written for convenience stores and a published price from $10 per user per month. If the same stores also need daily checklists and temperature logs, MaintainIQ covers audits, checklists and repairs in one app at $67 per location per month billed annually, or $79 month to month.

How much does a store audit app cost?

On 21 November 2026, published prices were $10 to $35 per user per month for GoAudits, free to $29 per seat per month for Mitti, and $67 to $79 per location per month for MaintainIQ. Xenia, YOOBIC, Crunchtime Ops Execution, Operandio and SmartSense do not publish prices.

Do store visit apps work without a signal?

MaintainIQ, GoAudits, Mitti and Operandio all say they work offline and sync later. For the others, the pages we checked did not say, so ask.

What is the difference between a store visit and an audit?

A store visit is the trip. The audit is the scored list you work through while you are there. A good visit also includes time with the team and a check on what was promised last time.

Can the store see its own score?

In most of these tools, yes. Sharing the score and the open follow-ups with the store manager is what turns a visit from an inspection into a plan.

Summarize with AI
Written by Will Jocson

Founder, MaintainIQ

More from Will

Your staff will change. Your standards shouldn’t.

See how MaintainIQ keeps every location running the same way, every shift.

Schedule a free demo
See how MaintainIQ works

Schedule a free demo

Finding open times…

Loading the calendar

The calendar did not load here.

Open the calendar